User Manual
–
Ray-On PoE series
5
sur
22
DOP1066_A
1.
Introduction
The PoE range includes 2 types of speakers:
-
Ray-On 70 PoE and Ray-On 110 PoE ensure perfect speech intelligibility and optimal acoustical
comfort, even in noisy and reverberant venues. They are based on the DGRC (Digital &
Geometric Radiation Control) principle patented by Active Audio.
Compared with a classic sound system in which each loudspeaker is controlled independently,
the DGRC method makes it possible to decrease the number of channels to be controlled,
thereby enhancing economic efficiency.
-
The Ray-On B70 PoE sound bar is designed for the sound reinforcement of narrow spaces such
as corridors, escalators, shopping alleys, shopping malls, railway platforms
…
B70 will also ensure the sound reinforcement of spaces with limited coverage areas, such as
video-conferencing equipment, huddle rooms, small spaces in museums
…
The arc position of the drivers allows a perfect directivity control in the spatially and in the
frequency domain. This directivity control allows to limit the sound disturbance in the sound
reinforced spaces neighbourhood.
Ray-On PoE characterized by the use of PoE (Power over Ethernet) technology which allows the
speakers to be supplied with power and audio signal using a single network cable.
Ray-On PoE range includes 3 models of loudspeakers from 70cm to 1.10m high (2 models) and
70cm wide (1 model).
R110 PoE
1.10m high
flat area
Range 20m
R70 PoE
0.70m high
flat area
Range 12m
Figure 1 :
Ray-On PoE
B70 PoE
0.70m wide
flat area
Range 12m
