Infrared Modem User’s Manual
Page
8
of
41
Revision 1.0
2003/11 From 3JTech
3)
Turn the switch to Serial on the rear of modem. Then please read the
Software
Installation
chapter.
Connect the modem to PDA
By Serial Port
Connect the cable for PDA (PP2-5600 Version) to the cradle
of your PDA. Push
the switch to
Serial.
Next, please see the
Installation Guide.
By IR Port
(Only for PP2I-5600 models.)
Please read the
Installation Guide
for IR.
LED Status
Green:
The colour of LED is tells the modem is Power on.
When switching the switch to MR or IR of the modem, the modem powers on.
The
GREEN
LED should light on when it is ready to connect.
Red:
When the battery is low (under 4V), the
Red
LED would light. Please recharge
the battery or replace the battery.
Power-Down Mode
Use terminal and AT command to control power down mode:
1.
Enable power-down mode:
Issue
“ATS63.1=0”.
( Def.)
2.
Disable power-down mode:
Issue
“ATS63.1=1”
.
