Page 5
NDC-5 Configuration Guide
Autoswitch Configuration
Autoswitching is a function where the device determines if the data on the Input is present and will
switch to another user determined Input if it is not.
By selecting the tick box for ASW 1 or/and ASW 2, it enables the Autoswitch function on the
device, and by selecting the ‘Config’ button it will prompt a second dialogue box to appear where
the priority of the devices can be defined.
As seen in this screenshot, the NDC-5 has been configured on ASW1 to have IN1 as the primary,
and to switch to IN2 as the secondary if IN1 fails. The priority is defined from left to right, where
left is highest priority.
