background image

ll

3

Contacting Technical Support

l

2

Introduction

Actiontec Electronics prides itself on making high-quality, durable, high-performance
products. If you should need assistance, the Actiontec Technical Support Department is
available 6 am to 11pm Mon - Sun (Central Time), to provide professional support.

Contacting Technical Support

Action

tec Electronics, Inc. 

760 N. Mary Avenue  

Sunnyvale, CA 94085

Phone: 1-719-884-8300  E-mail: [email protected] 

Thank you for purchasing the Actiontec USB Wireless Adapter. This USB Wireless
Adapter is easy to use and easy to setup. If you are tired off all those messy wires just to
connect a laptop to your Home network, then take your networking to the next level with
the Actiontec USB Wireless Adapter. You will be able to share files, printers and even your
High-Speed Internet access, all without wires. 

Package Contents

Make sure the following items came in this package:

USB Wireless Adapter

USB Cable

Actiontec USB Wireless Adapter Installation CD-ROM

This User’s Manual and Quick Start Installation Guide

Minimum System Requirements

One Pentium class computer, 200 Mhz or higher (preferably 300 Mhz  or above)

Microsoft Windows 98 Second Edition (SE), Microsoft ME, Microsoft 2000

installed

Introduction

Summary of Contents for USB Wireless Adapter 802UI3(b)














Reviews: