Connecting the Adapters
Connecting the MoCA Adapters is a relatively simple process. First,
connect one Adapter to the broadband modem/router via Ethernet, and
then to the coaxial network.
Th
en, additional Adapters can be installed
throughout the home or o
ffi
ce at any location Ethernet Internet access is
needed, and an available coaxial port is available.
Connecting the First Adapter
Th
e
fi
rst Adapter must be connected to the broadband modem/router,
and then to the coaxial network.
Th
is Adapter takes the Internet signal
from the modem or router and delivers it to the coaxial network.
To connect the
fi
rst Adapter:
1. Connect a coaxial cable into a coaxial wall port near the modem/
router.
2. Connect the other end of the coaxial cable installed in step 1 to the
Coax
port on the side of the Adapter.
3. Connect one end of an Ethernet cable into the Ethernet port of the
modem/router.
4. Connect the other end of the Ethernet cable into the
Ethernet
port on
the side of the Adapter.
5. Plug the provided power adapter into the
Power
port on the side of
the Adapter.
!
5
