Action Trackchair EAGLE, Owner'S Manual

Page: 10 / 50

Page | 9
•
The tilting of the seat can be achieved while driving in forward or reverse.
•
To activate the stand-up function on the Trackstander push the “M” button on the joystick control,
and then move joy stick lever forward to stand, backward to sit. Cancel by pushing “M” again or
moving joystick lever to the left.
•
Insure that the footrest plate is adjusted to a comfortable setting.
•
Always wear the seat lap belt and/or the 4 point shoulder harness as provided on all models as
well as the leg stabilizer straps (Falcon and Hawk models).
•
The operation of the joystick lever is similar to other readily available power wheelchairs. For forward
movement push the joystick lever in the direction that you want the chair to move towards. Release
the joystick lever to stop.
•
If your Trackchair/Trackstander has the joystick locking feature enabled, it can be unlocked in this
way . Turn control on, hold joystick lever forward until you hear a beep (or for a three second period),
then move the joystick lever backwards until you hear a beep (three second period). It is now
unlocked and ready for operation. To lock the joystick, press and hold the on/off button until the
control has cycled both on then off. At this point the joystick is locked.
Comfort Adjustments
The following adjustments can be made to customize the Trackchair/Trackstander to suit the needs of the
individual operator.
•
The footrest can be moved up or down to fit the operator’s specific needs, this can be
accomplished by relocating the foot rest locating pins. No tools are required to make this easy
adjustment.
•
The Trackchair
/Trackstander seat
tilt angle can be adjusted to suit the desired comfort needs of the
operator. This is accomplished by simply pushing the tilt on the fly rocker switch or by using the
joystick. No tools are required to make this adjustment.
•
The armrests can flip back (up) for easier transferring into and out of the Trackchair
/Trackstander
.