www.acti.com
www.acti.com
User
’s Manual
74
CAUTION:
If you switch the working mode, the enabled 802.1x and ARP protection will be
disabled automatically.
The valid MTU ranges from 576 to 1500 (1280-1500 for IPv6). To use IPv6, make sure
the NVR and PC can connect to each other using IPv6 addresses. To view live or
recorded videos, make sure the IPv4 addresses are also connectable.
PPPoE
The NVR allows access through Point-to-Point over Ethernet (PPPoE). If you are using 3G/4G
(see
for details), you need to disable it first.
1.
Click
System
>
Network
>
PPPoE
.
2.
Enable PPPoE by selecting the check box.
3.
Enter the username and password provided by your Internet Service Provider (ISP).
Network information including IP address appears when dial-up
succeeds.
NOTE:
If your NVR has multiple NICs, PPPoE dial-up will be implemented through the NIC
specified as the default route.
4.
Click
Apply
to save the settings.
