www.acti.com
www.acti.com
User
’s Manual
68
Alert
The NVR reports an alert when an event occurs in the system. The following are some alerts
and their definitions in the system.
Storage Error
: Storage such as recording or snapshot failed.
Running Out of Space
: Less than 10% of disk space remains.
Space Used Up
: No disk space.
Disk Offline
: A disk is not properly connected or is damaged.
Disk Abnormal
: A disk can be detected but cannot be accessed.
Illegal Access
: A failed login attempt for a username that does not exist or a
password that is incorrect.
Network Disconnected
: Network connection is lost.
IP Conflict
: Devices on the network use the same IP address.
Recording/Snapshot Abnormal
: Storage resouce cannot be found, for example,
when all hard disks are removed, or when there is no disk in disk group 1 (see
Perform the following steps to configure an alert:
1.
Click
Alarm
>
Alert
.
2.
Select an alert type, select the desired actions, and then select the camera(s) for which you
want to enable alarm output.
3.
Click
Apply
to save the settings.
Buzzer
The buzzer can be triggered by alarms to alert the user. Follow the steps to set how long the
buzzer will buzz after it is triggered.
1.
Click
Alarm
>
Buzzer
.
2.
Set the duration as needed. The range is from 1 to 600 seconds.
3.
Click
Apply
to save the settings.
