www.acti.com
www.acti.com
User
’s Manual
46
Snapshot
Set resolution, image quality and snapshot interval for snapshots taken according to schedule or
triggered by an event.
1.
Click
Camera
>
Snapshot
.
2.
Set the parameters as needed.
Parameter
Description
Snapshot Type
Scheduled snapshot uses the Normal type of schedule. Event-
triggered snapshot is triggered by an event such as an alarm input and
a motion detection alarm.
NOTE:
Settings effective to event-triggered snapshot also apply to
manual snapshot.
Resolution
Snapshot resolution.
Image Quality
High, Medium or Low resolution.
Snapshot Interval
The time interval between two snapshots.
3.
Click
Apply
to save the settings.
Draw or Edit a Schedule
Make a recording or snapshot schedule by drawing (pressing and dragging) or by editing (using
the
Edit
button). The operations for recording and snapshot are similar, so this section only
describes how to make a recording schedule.
1.
Click
Storage
>
Recording
.
2.
Select the camera from the list. Schedule is enabled by default. If it is disabled, select to
enable it.
3.
Set
Pre-Record
and
Post-Record
as needed.
4.
(Applicable to some NVR models) To save a redundant copy of recordings, select
Enable
Redundant Recording
and
configure a
details).
