ACTi VMGB-370 User Manual Download Page 65

Page: 65 / 74

www.acti.com

VMGB-

370 User’s Manual

Export Diagnose Information

Diagnose information includes running log, system information, hardware information.

Go to

Configuration → System → Maintenance → Upgrade & Maintenance

, and click

Diagnose Information

to export diagnose information of the device.

Reboot

You can reboot the device via browser.

Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Reboot.

Restore and Default

Restore and Default helps restore the device parameters to the default settings.

1. Go to

Configuration → System → Maintenance → Upgrade & Maintenance

2. Click

Restore

Default

according to your needs.

Restore

Reset device parameters, except user information, IP

parameters and video format to the default settings.

Default

Reset all the parameters to the factory default.

NOTE:

Be careful when using this function. After resetting to the

factory default, all the parameters are reset to the default

settings.

Upgrade

You need to obtain the correct upgrade package.

Caution

DO NOT disconnect power during the process, and the device reboots automatically after

upgrade.

1. Go to

Configuration → System → Maintenance → Upgrade & Maintenance

2. Choose one method to upgrade.

Firmware

Locate the exact path of the upgrade file.

Firmware Directory

Locate the directory which the upgrade file belongs to.

3. Click

Browse

to select the upgrade file.

4. Click

Upgrade

Summary of Contents for VMGB-370











































































Search results

Summary of Contents for VMGB-370

Reviews:

Related manuals for VMGB-370

Brands by name

Popular brands

ACTi VMGB-370, User Manual

Search results

Summary of Contents for VMGB-370

Reviews:

Related manuals for VMGB-370

Brands by name

Popular brands