www.acti.com
VMGB-
370 User’s Manual
25
Set Face Capture
The camera can capture the face that appears in the configured area, and the face information
will be uploaded with the captured picture as well.
Overlay and Capture
1. Go to
Configuration>Body Thermography >Face Capture >Overlay and Capture
.
2. Check
Display Target info. on Alarm Picture
to show a frame on the target on the uploaded
alarm picture.
3. Set the target picture size. Four types are available:
Custom, Head Shot, Half-Body Shot
and
Full-Body Shot
. If you select
Custom
, you can customized the width, head height and
body height as required.
4. Check
Fixed Value
to set the picture height.
5. Check the
Background Upload
to upload the background image.
6. Select the
Picture Quality
and
Resolution
from the drop-down list.
7. Click
Save
.
Set Shield Region
The shield region allows you to set the specific region in which the face capture does not work.
1. Click to draw shield area by left click end-points in the live view window, and right click to
finish the area drawing.
2. Optional: Click
x
to delete the drawn areas.
NOTE:
You are allowed to draw up to 4 areas on the same image, and each area can be set
with 3-10 points.
3. Click
Save
.
Advanced Configuration
Face Capture Version
: It lists the version of the algorithms library.
Upload Feature
: Check to upload the feature of captured target.
Capture Times
: Refers to the capture times a face will be captured during its stay in the
configured area.
Quick Shot
: You can define quick shot threshold and max. capture interval.
o
Quick Shot Threshold: It stands for the quality of face to trigger quick shot.
o
Max. Capture Interval: It describes the max. time occupation for one quick shot.
No Wearing Mask Linkage
: Check
Audible Warning
, the device will output audio alarm
if the target is not wearing mask.