TCM-7411 Hardware User’s Manual
Product Specification
TCM-7411
Device
Micron Progressive Scan CMOS
Size
1/3 inch
Effective Pixels
1280(H) x 1024 (V)
Color
Color mode automatically switched to B/W mode under 4 Lux
B/W
0.05 Lux at F1.0 (2400 °K, 30 IRE)
CDS Sensor
Yes
IR Sensitivity
from 700nm to 1100nm
Lens
f3.3mm~ 12mm/ F1.6
Viewing Angle
89.8º ~ 23.9º (Horizontal)
X (Panning)
0º ~360º
Y (Tilting)
0º ~180º
Z (Rotating)
0º ~360º
Synchronization
Sync. System
Internal
Day/Night
functions
Mechanical IR Cut
Filter
Yes
Motion Detection
Yes (3 Windows)
Electronic shutter
1/5 ~ 1/15,000 sec
Fixed Shutter (Manual)
1/30 ~ 1/1,000 sec. (60Hz)
1/25 ~ 1/1,000 sec. (50Hz)
Flickerless
1/120 sec. (60Hz)
1/100 sec. (50Hz)
BLC
Yes
AGC
Automatic (User defined)
White Balance
Auto, Indoor1, Indoor2, Outdoor1, Outdoor2, Hold Current, Manual
Wide Dynamic Range
Yes
S/N Ratio
S/N Ratio
Better than 44 dB
Compression
H.264/ MPEG-4 SP/ MJPEG simultaneous dual streams selectable
Picture Resolution
SXGA (1280x1024)
HD 720 (1280x720)
VGA (640x480)
QVGA (320x240)
QQVGA (160x112)
Bit Rate
28K ~ 6M bps
Image Frame Rate
18 fps at SXGA; 26 fps at HD720; 30 fps at VGA; 30 fps at QVGA; 30 fps at QQVGA
Compression
8kHz, Mono, PCM
Audio Line Input
Unbalanced, 1.4Vp-p, 1Vrms, terminal block
Compression
8kHz, Mono, PCM
Audio Line Output
Unbalanced, 1.4Vp-p, 1Vrms, terminal block
Digital Input
1, TTL, Terminal Block
Digital Output
1, TTL, Terminal Block
Reset Button
Factory Default
LED
System status/ Fan / Heater
IP66 Rated
Weatherproof casing with IP66 standard
Vandal Proof
Vandal proof supports, durability up to 659.23 KgF
Mount Types
Surface / Flush / Wall
Ethernet
Ethernet(10/100 Base-T), RJ-45 connector
Protocol
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, DNS, DDNS, NTP, ICMP,
ARP, IGMP, SMTP, FTP, UPnP, IPv6
Web Browser
Microsoft Internet Explorer 6.0 or above
SDK
ACTi SDK-10000
Security
Password Protection: Configured by the Administrator
Heater/ Fan
Yes (Built in)
Temperature
-30 ºC ~ 50 ºC (-22 ºF ~ 122 ºF) for DC 12V; -5 ºC ~ 50 ºC (7 ºF ~ 122 ºF) for PoE
Power Requirement
PoE (IEEE 802.3af) with Class 3
Power Consumption
4.8 W (DC 12V) w/o Heater & Fan
13.68 W (DC 12V) w/ Heater ON & Fan ON
6.24 W (PoE) w/o Heater & Fan
7.68 W (PoE) w/ Fan ON*
Dimensions (Ø xH)
151.69 mm x 114.9 mm (6.0” x 4.5”)
Weight
1040 g (2.29 lb)
Approvals
Certificate
CE, FCC, IP66
* PoE cannot support Heater.
Physical
Software
Power
Min. scene
Illumination
Camera Angle
Adjustment
Operating
Image
Network
Casing
Lens
Functions
Video
Compression
Alarm
Audio Input
Audio Output
External I/O
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
