TCM-6630 Hardware User’s Manual
SEQUENCE
Select a sequence line that the speed dome camer should execute when alarm pin is triggered.
The Sequence line should be defined prior in SEQENCE setup menu.
AUTOPAN
Select an auto-pan line that the dome camera should execute when alarm pin is triggered. The
Auto-pan line can be defined in setup AUTOPAN menu.
CRUISE
Select a cruise line that the speed dome camera should execute when alarm pin is triggered.
The Cruise line can be defined in CRUISE setup menu.
DWELL TIME
The DWELL TIME is the duration of executing ALARM ACTION: Preset or Sequence. When
alarm takes place, the dome will go to the preset position or execute sequence function and
stay at each sequence point for a period of time (1~127 seconds). If select <Always>, the
dome will go to the preset position and stay there until alarm condition is released or users
rotate the dome.
EXIT
Exit the ALARM SETTING menu.
HOME SETTING
Users are able to set an operation mode to ensure constant monitoring; if the dome idles for a
period of time, the pre-set function will be activated automatically, this is the HOME function. HOME
function allows constant and accurate monitoring, to avoid the speed dome stops or missing
events.
NOTE:
The DWELL TIME is only accessible when selecting
ALARM ACTION: Preset or Sequence.
HOME SETTING
HOME FUNCTION
OFF
SELECT MODE
PRESET
PRESET POINT
001
RETURN TIME
001
GO
ENTER
EXIT
YES
