TCM-1231 Series Hardware User’s Manual
How to Do the Waterproof Installation
The following installation procedure makes the camera be water-resistant even for the
situations where the camera can easily be flooded by pouring rain.
The important part to focus on during the installation:
The protection of the cabling has to be done by a proper flex
conduit. The size of the flex conduit that matches with the
conduit gland is 1/2”. Please note that the
conduit gland is
included to the package
of the bullet camera.
The following images show the step-by-step procedure of
completing the water-proof installation.
1.
Disassemble the conduit gland as
shown on the photo.
2.
Pull the network cable through the flex
conduit. Please note that the size of the
conduit and the gland is big enough to let
the RJ-45 connector pass through all the
way.
3.
Two pieces from the conduit gland set
will be attached to flex conduit first.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
