Quick Installation Guide for PMAX-0333
The PMAX-0333 is a wall mount mounting kit for the A8x series.
Package Content:
Wall Mount
Mount Kit
Mount Kit Adapter
Adapter Screws
Mount Kit Screws
Wall Mount Screws
Rubber Gasket
Installation Instructions:
1. Prepare the camera
a) Make sure to attach the metal cap that came with the camera on
the side conduit hole.
Note
: Ensure the metal cap is tightly secured to avoid possible
water leak.
b) Remove the (3) O-Rings from the screws that came with the camera
and put the O-Rings on the (3) mount kit screws.
c)
Remove the rubber from the bottom cable hole of the camera.
d) Slightly cut off the tip of the rubber, just enough for the rubber to
expand and let the Ethernet cable to pass through.
e). Insert the rubber back into the camera bottom hole.
2. Run the cable (without adapter) through the wall mount and secure the
wall mount to the wall using the (4) wall mount screws.
3. Screw the mount kit adapter to the mount kit
4. Place the rubber gasket into the grove going around the mount kit.
