Installation Guide
Step 7: Waterproof and Connect the Network Cable
Waterproof Solution Using the “Pigtail”
on page 13.
Step 8: Connect to Network
Connect the other end of the network cable to a switch or injector. Then, connect the switch or
injector to a network or PC and a power source. See Power-over-Ethernet (PoE) example
connection diagram below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
In case of using a non-PoE switch, power up the camera using a power adapter (not supplied).
See the camera Hardware Manual, downloaded from our website (
) for more
information on connecting other devices.
Step 9: Access the Camera Live View
How to Access the Camera Live View
on page 21.
