www.acti.com
ACTi
Knowledge Base
Category:
Installation & Configuration Note
Sub-category:
Application
Model:
ACM-3511/ACM-3011
Firmware:
N/A
Software:
N/A
Author:
Victor.Wang
Published:
2009/09/02
Reviewed:
2010/01/21
1
Tips for 3-Inch Dome Installation
Contents
Installation of camera plate
Installation of camera
Installation of front cover
Future design and improvement
Introduction
Some customers have a problem with installing a 3 inches dome. After adjusting the viewing
angle, zoom or focus, the lens part will be moved again by the rubber and black plastic cover
when they closing the dome cover. The purpose of this document is to guide customer through
the procedures of installing a 3 inches dome efficiently.
Installation of camera plate
1.
Use the drill template, and drill a hole with
φ 35 on the ceiling.