ACTi A1D-220-V3.14.19-AC User Manual Download Page 9

Page: 9 / 69

1.3 Configuring the IP device

This section describes how to configure the IP device. The

administrator has unlimited access to all settings, while the normal user can

only view live video. The IP device is configured under a standard browser

(Microsoft IE6 / IE7 / IE8).

Follow the procedures below to configure the IP device.



STEP1:

Open a browser



STEP2

: Enter the IP address of the IP device.

The default IP address is “192.168.0.100”

You need to allow the Active X install in IE to properly access this

device. If you encounter any issues, please modify your security setting and

allow ActiveX from this device.

Please see this knowledge base article for details

link

The “Login Page” is now displayed as below



STEP3:

Enter account name (factory default: Admin) and password

(factory default: 123456).



STEP4

: Select the language of the IP device user interface. You can

NOTE:

Internet Explorer 6.0 / 7.0 / 8.0 is highly recommended. You

may download it from

http://www.microsoft.com/windows/ie/downloads/default.mspx

Summary of Contents for A1D-220-V3.14.19-AC






































































Search results

Summary of Contents for A1D-220-V3.14.19-AC

Reviews:

Related manuals for A1D-220-V3.14.19-AC

Brands by name

Popular brands

ACTi A1D-220-V3.14.19-AC, User Manual

Search results

Summary of Contents for A1D-220-V3.14.19-AC

Reviews:

Related manuals for A1D-220-V3.14.19-AC

Brands by name

Popular brands