System buttons
Restart
System
Help
“Restart” resets the settings of the selected
application (button) to the values which were
active when the application was invoked. The
Restart button also restarts the measurements.
The “System” button can be used for the basic
system setup, allowing you to enter parameters
such as user name, date and time, storage loca-
tion (for screenshots and reports), sound volume
and brightness. You can also view the equip-
ment revisions.
Using “Print” you can save screenshots or
reports. If a printer is connected to the
TestPad 2000, you can also print the reports.
Select the System button to set up the printing
location, e.g. when using a PCMCIA-based
memory extension.
For calling up the online help.
