Acterna BN 2255/02, Operating Manual, Page: 7 / 40

5
Connector cables
This makes faulty measurements due to im-
proper wavelength settings on the power meter a
thing of the past.
The wavelengths and modes are set using the
membrane keypad.
When powered from two standard batteries
(AA/Mignon), the device can be operated free of
the a.c. line.
The housing of your OLS-6 is designed for use
under tough conditions. It is highly impact-resis-
tant. The shock protection is designed to allow
access to the display and keypad on the front
side and the battery compartment on the back
side. The serial number is also found on the back
side.
System connection using adapter cables
Suitable adapter cables are available for all
OLS-6 variants (for all jack types).
If your OLS-6 is fitted with the same type of jacks
as your power meter, then you need an adapter
cable with the same connector types (e.g. a ca-
ble with two FC-PC connectors).
If your OLS-6 uses a different jack type than your
power meter, then you need an adapter cable
with two different connector types (e.g. a cable
with an FC-PC connector and an FC-APC con-
nector).