Chapter 3: Hardware Description
14
If you want to use the device I/O for other purposes, remove the jumpers.
Switches Device Connections
Four switches are connected to the device via jumpers. If the jumpers are in
place the device I/O can be driven by the following switches:
• Pressing the switch drives a 1 into the device. The 1 continues to drive while
you hold the switch.
• Releasing the switch drives a zero into the device.
Table 3-2 lists the switch/device connections.
If you want to use the device I/O for other purposes, remove the jumpers.
Table 3-1. LED Device Connections
LED
Device Connection
DS1
87
DS2
90
DS3
91
DS4
92
DS5
93
DS6
94
DS7
95
DS8
96
QS_Tutorial_eval.book Page 14 Monday, January 13, 2003 1:08 PM
Summary of Contents for ProASIC PLUS
