ACT Meters GOLD-IBT Quick Start Manual Download Page 1

Simulates full battery discharge

test in seconds!

New GOLD-IBT

Tests 12Volt SLA and Car batteries from 1.2Ah - 200Ah.

Automatically displays Ambient Temperature, DC Voltage

and Ampere hour (Ah) Capacity available in the battery.

Award-Winning

I N T E L L I G E N T

BATTERY TESTER

Unique GOLD-IBT features!

Simulates full battery discharge test in seconds.

Tests 12Volt SLA and Car batteries from 1.2Ah - 200Ah.

Automatically displays Ambient Temperature, 
DC Voltage and Ampere-hour Capacity available.

Powered by battery under test with polarity protection.

Warns if battery voltage is too high or low.

Table indicates when batteries need to be recharged or
replaced.

Quick, accurate and easy to use.

Applications include:  Fire and Burglar Alarm Systems, Motor
Vehicles, Boats, UPS Systems, Telecommunications,
Emergency Lighting, Portable Tools, Lawnmowers, Mobility
Vehicles, Medical Equipment, Solar Power, Robotics etc.

For full product range, testimonials and worldwide
distributors visit:-

w w w . a c t m e t e r s . c o m

Thank you for purchasing this unique Award-winning
Intelligent Battery Tester.  Before use, please read the
operating instructions and battery testing tips carefully.

Produced in the UK by:-

Address:

ACT Meters Ltd
The Old Smithy
Church Road
Rainford
Merseyside 

Post Code:

WA11 8HD

Country:

United Kingdom

Phone: 

+44(0)1744 886660

Fax: 

+44(0)1744 886661

USA Freecall:   1-877-712-2278
Email:

[email protected]

Web:

www.actmeters.com

For future service and re-calibration return to ACT
Meters Ltd (call above for cost).

The problem

Battery manufacturers recommend to recharge

or replace the battery when the rated Amp/hr (Ah) capacity
falls below 65% - but multimeters are only capable of
measuring terminal voltage!   

The solution

The new GOLD-IBT Intelligent Battery Tester

from ACT Meters is designed to simulate a full battery
discharge test in seconds!  Digitally programmed to test
12Volt SLA and car batteries from 1.2Ah - 200Ah, this unique
Award-winning product automatically displays Ambient
Temperature, DC Voltage and Ampere-hour Capacity
available in the battery.   It’s quick, accurate and easy to use
and identifies batteries that need to be recharged or replaced
according to prevailing conditions - irrespective of how long
they have been in use.

How it works

The Intelligent Battery Tester is not a load

tester, nor does it measure resistance or conductance.  Instead
it works by applying a pulsed frequency to the battery under
test. The patented neutral net software analyses the
chemistry of the battery during this process and provides a
direct reading in Amps/Hr.  The design took many months to
complete and accuracy was assured by performing a full
discharge test on 100s of batteries and comparing results.
Testimonials as to its benefits, reliability and performance can
be viewed by visiting www.actmeters.com.

For excellence and innovation 

in the Security Industry...

In recognition of new product
development and innovation...

Farnell InOne order code 

7820097

Summary of Contents for GOLD-IBT







Reviews: