ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
12
Maintenance
The device is free of maintenance.
Special substances can lead to solid coatings.
Seized depositions can lead to faulty measurement results.
In the case of coat forming liquids the probe must be regularly cleaned e.g. with clear water or a
common vinegar cleaning agent (lime).
Repair
A repair may only be carried out by the manufacturer.
If the device must be sent back for repair, the following informations must be enclosed:
•
An exact description of the application.
•
The chemical and physical characteristics of the product.
•
A short description of the occurred error.
Before returning the device for repair, the following measures must be proceeded:
•
All adhesive product residues must be removed. This is especially important, if the product is
unhealthily, e.g. caustic, toxic, carcinogenic, radioactive etc.
•
A returning must be refrained, if it is not possible by 100% to remove the unhealthily product
completely, because e.g. it is penetrate into cracks or is diffused through plastic.
Summary of Contents for Fluxicont FP
Page 14: ......
