ACR1281U-C8 – Application Programming Interface
Version 1.00
www.acs.com.hk
Page 5 of 52
2.0. USB Interface
The ACR1281U-C8 is connected to a computer through USB as specified in the USB Specification
2.0. The ACR1281U-C8 is working in full speed mode, i.e.12 Mbps.
The USB interface is used for firmware upgrade purpose.
Pin
Signal
Function
1
VCC
+5V power supply for the reader
2
D-
Differential signal transmits data between reader and PC
3
D+
Differential signal transmits data between reader and PC
4
GND
Reference voltage level for power supply
Table 1
: USB Interface Wiring
Note
: In order for the ACR1281U-C8 to function properly through USB interface, ACS proprietary
device drive has to be installed.