ACR128 Dual Interface Smart Card Reader
Response
Response
Data
E1 00 00 00 02 Max
Conn
Speed
Current Conn
Speed
Use Table 19 to format and interpret the Maximum and Current Connection Speed values,
respectively.
NOTE:
Normally, the application should know the maximum connection speed of the PICCs being used. The
environment also affects the maximum achievable speed. The reader uses the proposed communication
speed to communicate with the PICC. The PICC will become inaccessible if the PICC or environment does not
meet the requirement of the proposed communication speed.
5.12 Read and Update the RC531 Register
To read the RC531 Register in the device, issue the following command:
ACR128 Escape Command
Read RC531 Register
19
01
Register No
Response
Response
Data
E1 00 00 00 01 Current
Value
To update the RC531 Register in the device, issue the following command:
ACR128 Escape Command
Read RC531 Register
1A
02
Register No
New Value
Response
Response
Data
E1 00 00 00 01 Current
Value
Page
23 of 36
ACR128 API
Version 1.7 May 2008
