55
A1040 MIRA 3D
© 2021 Acoustic Control Systems – ACS Group
MAP
MAP
Table 5: Description of parameters
Lable
Icon
Description
Step X
Defines distance between measurement positions along X axis
Step Y
Defines distance between measurement positions along Y axis
Scan
direction
Defines next measurement position with respect to the current
one. Left, right, up and down options are available.
Grid type
Allows operator to load data from the selected measurement
position.
Allows operator to project all data to a single (panorama)
image from the selected row. Merging is carrying out in
accordance with xy coordinate.
Allows operator to project all data into a single (panorama)
image from the selected column. Projection is carrying out in
accordance with XY coordinate.
Allows operator to project all data from the selected area into a
single (panorama) image.
Horiz.
map size
Defines the limit of measurement positions along X axis . After
reaching the last position operator will be offered to start a
new horizontal line. Operator may switch off the limits.
Vert.map
size
Defines the limit of measurement positions Y axis. Behaves
similar to Horiz. map size
19.2 Display parameters
Display parameters in MAP mode are the same as in B-Scan mode. Please, refer to
the list of display parameters
.
19.3 File manager
File manager in MAP mode has similar functionality as the manager in B-Scan
mode. Please, refer to file manager description
19.4 MAP manager
MAP manager parameters are listed in the corresponding tab as is shown below.
48
50
