background image

ANR-J190N2-C612, ANR-J180N2-C612 User Manual

24

Acrosser Technology Co., Ltd.

3.2.7. 

S5 RTC Wake Settings

Enable system to wake up from S5 using RTC alarm.

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.

Version 2.17.1246. Copyright (C) 2016 American Megatrends, Inc.

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Advanced

Wake system from S5

Wake up day

Wake up hour

Wake up minute

Wake up second

[Fixed Time]

0

0

0

0

Enable or disable System 

wake on alarm event. Select 

FixedTime, system will wake 

on the hr::min::sec specified.

Select DynamicTime, System 

will wake on the current time 

+ Increase minute(s)

This Section allows you to wake up the system in a certain time. Select [Fixed Time] 

to set the timing to awake the system.

Use <

>, <

> to switch among the items [Day, Hour, Minute, and Second], and 

type the value in the selected item as you wish.
For example, if you want the system start up automatically at 14:25:26, the 13th day 

of each month, then you should enter 13, 14, 25, and 26 from top to bottom.

Summary of Contents for ANR-J180N2-C612




















































Reviews: