AIV-TGH7Ex
15
www.acrosser.com
2.2.
LED Indication
Mode 0 and 1:
LED will be constant ON when power output is ON. LED will be constant OFF when
power output is off.
Mode 2 to 15 (Smart ATX mode):
The LED will flash a number of blinks to state the status. Each blink remains 500
milliseconds ON followed by a 500 ms OFF. Each Cycle will have a 5-second OFF in
between.
LED Flashing Number Status
0 (Constant ON)
Power Output runs normally.
1
Hard off mode
2
Standby mode (After power output is turned off until 5VSB
is turned off.)
3
Power soft off delay. (After ignition is turned off or remote
switch is pressed until power output is turned off.)
4
Battery voltage low
5
System on/off fail. When motherboard cannot turn on or
turn off after retry.
6~128
Reserved
