MiniPuck Model ST132-06x0 Two-Wire TC/mV Transmitter
________________________________________________________________________________
______________________________________________________________________________________
Acromag, Inc. Tel:248-295-0880 Fax:248-624-9234 Email:
17
At this point, you can select a device from the “Devices Found” field pull-
down menu by clicking on it, then clicking the “Open” button to connect to
the device for the purpose of reconfiguration and/or test (use the serial
number to discern a particular transmitter). The screen should then appear
similar to the one shown below. Note that “No error encountered while
reading configuration” is displayed in the System Message Window at the
lower left corner of the screen. Additionally, the device Product Name field
displays the Model, the Manufacturer field displays “Acromag, Inc.”, and the
Serial field displays this model’s serial number. Additionally, most of the
other fields and controls are not faded out and await your input.
If more than one transmitter was connected via USB through a hub, you can
discern which transmitter to open by referring to the product’s unique serial
number appended to the Product Name. If your intent was to open a
different transmitter on the hub, then you simply “Close” the current
connection and use the Devices Found scroll bar to select another
transmitter (discern by serial number), then click “Open” to open it for
communication. If you break the USB connection to a transmitter, the
software will display the following:
CONFIGURATION &
CALIBRATION
Reconfiguration
HELP
– You can press F1 for
Help on a selected or
highlighted field or control.
You can also click the [?]
button in the upper-right hand
corner of the screen and click
to point to a field or control to
get a Help message pertaining
to the item you pointed to.