SERIES I/O SERVER MODULE
MIL-STD-1553A/B Bus Interface Module
________________________________________________________________________
3
Acromag, Inc. Tel:248-295-0310 Fax:248-624-9234 Email:[email protected]
www.acromag.com
The information contained in this manual is subject to change without notice. Acromag,
Inc. makes no warranty of any kind with regard to this material, including, but not limited to,
the implied warranties of merchantability and fitness for a particular purpose. Further,
Acromag, Inc. assumes no responsibility for any errors that may appear in this manual and
makes no commitment to update, or keep current, the information contained in this manual.
No part of this manual may be copied or reproduced in any form, without the prior written
consent of Acromag, Inc.
IMPORTANT SAFETY CONSIDERATIONS
It is very important for the user to consider the possible adverse effects of power, wiring,
component, sensor, or software failures in designing any type of control or monitoring
system. This is especially important where economic property loss or human life is
involved. It is important that the user employ satisfactory overall system design. It is
agreed between the Buyer and Acromag, that this is the Buyer's responsibility.
RELATED PUBLICATIONS
The following manuals and part specifications provide the necessary information for in
depth understanding of the IOS-57x Series boards. These documents are available on the
Data Device Corporation web site
BU-6174X/6184X/6186X ENHANCED MINIATURE ADVANCED
COMMUNICATIONS ENGINE data sheet
Enhanced Miniature Advanced Communications Engine (Enhanced Mini-ACE®
Series) Users Guide MN-6186X-001
MIL-STD-1553
DESIGNER’S GUIDE Sixth Edition
GENERAL INFORMATION
The I/O Server (IOS) Series IOS-57x modules provide the interface between the IOS and
the MIL-STD-1553A/B bus. The IOS-57x series modules are built upon Data Device
Corporation’s Micro ACE MIL-STD-1553 terminal. The Micro ACE provides Bus Controller
(BC), Remote Terminal (RT), and Bus Monitor (BM) functions. The Micro ACE includes 64K
words of RAM for message queues. IOS-57x modules support both direct and transformer
coupled applications. A synchronization clock input and output is provided. The RT
address lines for each channel are available at the connector to allow setting the RT
address with the wire harness.
The IOS-57x Series consists of two models with one or two dual redundant 1553 channels.
Important Note:
The following IOS models are accessories to the IOS Server Models:
IOS-7200, IOS-7200-WIN, IOS-7400, and IOS-7400-WIN; which are cULus Listed. This
equipment is suitable for use in Class I, Division 2, Groups A, B, C, and D or non-
hazardous locations only.
