Acromag AVME9675A Series User Manual Download Page 10 | Manualshive

Page: 10 / 61

background image

INDUSTRIAL I/O PACK SERIES AVME9675A

VMEx64 bus 6U CARRIER BOARD

Acromag, Inc. Tel: 248-295-0310

- 9 - http://www.acromag.com

- 9 -

https://www.acromag.com

SCSI-2 to Flat Ribbon Cable, Shielded (Model 5028-187).

Transition Module:

Model TRANS-200: This module plugs into the rear backplane directly
behind the carrier board. The field I/O connections are made through the
backplane to P0 (AVME9670 & AVME9675A-4) and P2 (AVME9670,
AVME9675A-2 & AVME9675A-4) connectors of the carrier board and then
routed to four (two AVME9675A-2) SCSI-2 connectors on the transition

module (marked IP module slots “A through D”) or (“A through B” for

AVME9675A-2) for rear exit from the card cage. It is available for use in
VME64x bus card cages which provide rear exit for I/O connections via
transition modules (transition modules can only be used in card cages
specifically designed for them). It is a double-height (6U), single-slot module
with front panel hardware adhering to the VME64x bus mechanical
dimensions and IEEE Standard (1101.11-1998), with a printed circuit board
depth of 80mm, which is a standard transition module depth. The transition
module connects to Acromag Termination Panel (Model 5025-552) using
SCSI-2 to Flat Ribbon Cable, Shielded (Model 5028-187) to the rear of the
card cage, and to AVME9670, AVME9675A-2 & AVME9675A-4 boards within
the card cage.

1.5 Software Support

The Industry Pack series products require support drivers specific to your
operating system. Supported operating systems include: Linux, Windows,
and VxWorks

Windows



Acromag provides software products (sold separately) to facilitate the
development of Windows



applications interfacing with Industry Pack

modules. This software (model IPSW-API-WIN) consists of low-level drivers
and Dynamic Link Libraries (DLLs) that are compatible with a number of
programming environments. The DLL functions provide a high-level
interface to boards eliminating the need to perform low-level reads/writes
of registers, and the writing of interrupt handlers.

«
...
8
9
10
11
12
...
»

Summary of Contents for AVME9675A Series






























































Reviews:

No comments

Related manuals for AVME9675A Series

Brand: Childcare Pages: 12

Brand: VERTBAUDET Pages: 6

Brand: VERTBAUDET Pages: 14

BaByBjörn Baby Carrier Origina

Brand: BabyBjorn Pages: 5

Brand: Samsung Pages: 56

COM Express conga-IT6/COMe

Brand: Congatec Pages: 45

Brand: Congatec Pages: 75

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands