Acrobat M24, Manual

Page: 9 / 18

9
7– Operation Of Machine
Machine includes a 3 kw electric motor. Firstly measure the currents coming to plug you will use before
connecting your machine to plug and operating it. It must be 380 V between the phases and 220 V
between phase-neutral. If alternating current is reaching to system, it will damage electrical system of
your machine. In this situation, use a regulator to balance phases before operating the machine.
WARNING! Otherwise electric faults which may occur will not be in scope of guarantee.
Electric installation has phase protection relay. So that when phase with reverse order reaches to electric
motor, phase protection relay activates and prevents the reverse operation of electric motor and hydraulic
pump which is connected to motor from working in reverse direction, and protects the system. (See Picture
2) In such a situation if the machine is not working, remove machine's three-phase electric cable and
connect to another suitable three-phase socket. When the phase coming to motor is correct, system will
activate.
To start the machine open pacco switch on unit and press on motor start button (green button) after
waiting for 5 seconds. (See Picture 3) And hydraulic system will become activate
MOTOR
STOP
MOTOR
START
PACCO
SWITCH
Picture –3
When the lamp is off
REVERSE PHASE
When the lamp is 0n
FLAT PHASE
Picture –2