21
6. Parameter setting
6.1 Parameter setting interface
The parameter setting interface is divided into the following parts: input setting, communication setting, alarm
setting, DO setting, AI setting, AO setting, multi-rate setting, recording setting, demand setting, system setting, clear
setting, version information.
6.2 Input settings
On the main interface, press Menu to enter the menu interface, press
∨
until
“
Parameter Setting
”
is
highlighted, and press
√
to enter the parameter setting interface. Press
∨
until
“
Input Settings
”
is highlighted,
press
√
to enter the input settings interface. Press
∧
or
∨
to switch the input setting item, press Enter to enter
the setting of the item, press + or - to change, press > to shift, after the current item setting is changed, press Exit to
exit the item setting. Continue to repeat the above steps to modify the settings. After the change is completed, press
Exit to enter the password. The default password is 0001 (customer can change the password according to the
password setting set by 7.11 system. If you forget the password, you need to contact us). Press SaveExit to save the
changes and exit, press Esc to exit without saving the changes.
