COPYRIGHT 2010 - 2020, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED
OMNICYCLE
®
ELITE USER MANUAL
33
Certificate of Conformance Inspection
Certificate of Conformance Inspection, consisting of an electrical safety check, is recommended to be performed at
least biennially (every two years).
Good Operating Practices
Users should follow and complete the following recommendations on an ongoing basis:
•
Routinely check for power cord fraying or any other damage to the power cord.
•
Check to ensure that the cycle ergometer is operating smoothly. Any change in the ergometer operation
should be reported to the Service Center.
•
Always check that the power cord, cardiac pickup and display control cables are properly routed and are
not in danger of being snagged/pulled by the lower or upper cycle operation.
•
Always keep the system clean and keep any debris, such as paper, string, cloth, or clothing away from the
cycle moving parts.
Servicing Your Omnicycle
®
Elite
For repair or service of ACP Products and accessories, please call (800) 350-1100 and follow the prompts. Normal
hours of operation are 6:00am to 5:00pm Pacific Standard Time. After hours, please leave a message and a
technician will return your call during the next scheduled workday.
Proper Disposal
Proper disposal procedures shall be observed as required by specific state and/or local regulations. It is the
responsibility of the owner of the device to follow applicable laws and regulation on disposal guidelines.
