ACOUSTIC SOLUTIONS BD-1738, Instruction Manual, Page: 7 / 44

7
Connection
1. Connect the speakers to the Left (white) and Right (red) speaker sockets on the back of the
HiFi.
2. Fully extend the radio aerial on the back of the HiFi to receive the best possible radio
reception and sound quality when you scan for DAB and FM radio stations.
3. Plug the mains power plug into the mains power wall socket and
switch on. The HiFi will switch on, the Acoustic Solutions logo will
be displayed for a few seconds.
4. Please wait, the Setup wizard screen will then be displayed for you
to enter the settings required to connect to your home router for WiFi
internet Radio and My Music access.
5. Pull out the safety strip on the remote control to activate the battery.
Initial set-up
On first use your HiFi will display the Setup wizard screen for you enter the settings to connect
to your home router for WiFi internet Radio and My Music access. We recommend that you
do proceed with this Setup and we have included the steps to do this below.
Alternatively, if you would prefer to run the Setup wizard to connect to your router later, use
the rotary Tune/Select control to highlight ‘NO’ and short press to select. A further screen will
be presented to check if you would like to run the Setup wizard the next time you power on
your HiFi. Use the Tune/Select control to highlight YES or NO as appropriate and short press
the Tune/Select control. The main menu screen for your HiFi will then be displayed.
Note:
If at any point during the Setup wizard process, you wish to go back to change a
setting, just short press the Menu/Info button, which is under the rotary volume control.
1. The Setup wizard screen will be displayed, with the ‘YES’ option
highlighted, short press the Tune/Select control.
2. The Date/Time screen will be displayed, with the 24 hour option
already highlighted. Use the Tune/Select control to highlight the
time format that you would prefer for your HiFi and then short
press the Tune/Select control to select.
3. The Auto update screen will be displayed. This will enable your
HiFi to update its clock settings automatically, from the DAB radio
signal, the FM radio signal, to update from the Network or No
update, if you wish to set the time and date manually and do not
want your product to automatically update.
Use the Tune/Select control to highlight your preferred option and press to select. The
steps are included here for if you select the highlighted option of ‘Update from Network’.
Setup wizard
Start now?
YES NO
Auto update
Update from DAB
Update from FM
Update from Network
No update
Using your HiFi