29
Onboard FDD Controller
Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and
you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in
this field. The settings are: Enabled and Disabled.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and the second serial ports. The settings
are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
UART2 Mode
This item allows you to determine which InfraRed(IR) function of the onboard I/O chip, this
functions uses.
Onboard Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that Provides Standard, ECP, and
EPP features. It has the following option:
Disabled
(3BCH/IRQ7)/
Line Printer port 0
(278H/IRQ5)/
Line Printer port 2
(378H/IRQ7)
Line Printer port 1
Parallel Port Mode
SPP
: Standard Parallel Port
EPP : Enhanced Parallel Port
ECP
: Extended Capability Port
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To operate
the onboard parallel port in the EPP modes simultaneously, choose “EPP.” By choosing
“ECP”, the onboard parallel port will operate in ECP mode only. Choosing “ECP+EPP” will
allow the onboard parallel port to support both the ECP and EPP modes simultaneously. The
ECP mode has to use the DMA channel, so choose the onboard parallel port with the ECP
feature. After selecting it, the following message will appear: “ECP Mode Use DMA” at this
time, the user can choose between DMA channels 3 to 1. The onboard parallel port is EPP
Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the
following message will be displayed on the screen: “EPP Mode Select.” At this time either
EPP 1.7 spec. or EPP 1.9 spec. can be chosen.
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Power Management Setup
Item Help
ACPI Function Enabled
ACPI Suspend Type S1(POS)
Video off Method V/H SYNC+Blank
Power Button Function Instant-Off
Wake-Up on PCI PME Disabled
Wake-Up on Ring/LAN Disabled
USB Resume from S3/S4 Disabled
Wake Up on RTC Alarm Disabled
X Time(dd:hh:mm) of Alarm 0: 0: 0
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
