User's Manual | ACOM 500S | 160-4
m Linear Power Amplifier
Page 38 of 66 | S e c t i o n OPERATION
March 2023
The connection of ACOM 04AT or 06AT tuner will make accessible specific features on the amplifier display that
provide a transparent operation by following frequency and antenna selection changes in less than 50 ms.
Figure 4-3 | ACOM 500S amplifier screen with ACOM 04AT or 06AT antenna tuner installed
Figure 4-3 | ACOM 500S amplifier screen with ACOM 04AT or 06AT antenna tuner installed
The operation of ACOM S-series amplifiers (solid-state devices) with ACOM 04AT and
06AT are described in detail in the respective User's Manual:
•
ACOM 04AT User's Manual;
•
ACOM 06AT User's Manual.
The documentation is available for download at
Pay particular attention to Sections
3.2 Indications, controls and menus
, and
4.2 Tuner
Assignment and Unassignment
in the downloaded manual for details on ACOM 04AT or
06AT control from amplifier front panel.
Use of other non-ACOM antenna tuners is possible at
RF OUTPUT 2
only.
