ACOEM Met One Instruments GAS-1060, User Manual

Page: 144 / 164

Serinus 60 User Manual 3.0
Page 144
A.2.4 Set Calibration
Enters a new calibration value: the same as entering Span Calibrate or Zero Calibrate on the
calibration menu.
Where:
Command byte 18
Message byte 1 0, 1, 2, or 3 where
0 = Span
1 = Zero (first zero gas)
2 = Zero (second zero gas)
3 = Zero (Third zero gas)
Message byte 2-5 The IEEE representation of the calibration value.
A.3 List of Parameters
Note: Parameters are for all Serinus series analysers and may not be applicable to an
individual instrument.
Table 19 – Advanced Protocol Parameter List
# Description Notes
1 Cal/Zero Valve 0 = Zero, 1 = Cal
2 Internal Span Valve 0 = Off, 1 = On
3 Positive Supply Positive analog supply voltage
4 Gas 5 Avg. Average of the readings (for Gas 5) of the last n
minutes where n is the averaging period E.g. Nx
5 Pregain S30H linearization coefficient gain
6 Sample/Cal Valve 0 = Sample, 1 = Cal/Zero
7 NOx Measure Valve 0 = NO, 1 = NOx
8 NOx Bypass Valve 0 = NO, 1 = NOx
9 NOx Backgnd Valve 0 = Off, 1 = On
10 Valve Sequencing 0 = Off, 1 = On
11 LCD Contrast Pot 0 = Lightest, 255 = Darkest
12 SO2 Ref Zero Pot S50 Reference zero pot
13 CO Input Pot S30 Input pot
14 CO Reference Test Pot Not Used