4/ 100
Oleolift-C
Table of Contents
3.3.7 Laying and connecting the on-site blank cable pipe .................................. 33
3.3.8 Laying and connecting the on-site pressure pipe ..................................... 34
3.3.9 Installing on-site direct suction (optional) ................................................. 35
3.3.10 Installation in the outdoor cabinet (optional) ............................................ 38
3.3.11 Leak test ............................................................................................. 39
3.3.12 Backfilling the excavation
...................................................................... 40
3.4 Installation work ............................................................................................... 40
3.4.1 Assembling the chain holder .................................................................. 40
3.4.2 Installing the submerged pumps ............................................................. 40
3.4.3 Mounting the level probe with protective pipe .......................................... 42
3.4.4 Assembling cable gland ......................................................................... 45
3.4.5 Mount idOil sensors .............................................................................. 47
3.5 Electrical installation ......................................................................................... 50
3.5.1 Overview of the electrical installation work .............................................. 50
3.5.2 Supply power to the heater (optional) and the power socket (optional) ...... 51
3.5.3 Installing the control unit ........................................................................ 51
3.5.4 Connecting the control unit to the power supply ...................................... 51
3.5.5 Connect the connection cable of the submerged pumps .......................... 52
3.5.6 Check the rotational direction of the submerged pumps ........................... 52
3.5.7 Connect the connection cable for the level probe .................................... 52
3.5.8 Connect cable connector LCJ1-3 ........................................................... 52
3.5.9 Connect the cable extension (idOil sensors) ............................................ 53
3.5.10 Connect fault message device (optional) ................................................. 53
3.5.11 Installing ex-safety-barrier (optional) ........................................................ 53
4 Operation ...................................................................................................... 54
4.1 Commissioning................................................................................................. 54
4.2 Control unit ...................................................................................................... 55
4.2.1 Operating and display elements - External control unit .............................. 55
4.3 Touch-Panel ...................................................................................................... 56
4.3.1 Main screen _ Overview ......................................................................... 56
4.3.2 Page view _ Detailed view ..................................................................... 58
4.3.3 Page view _ Settings / System .............................................................. 60
4.3.4 Page view _ Fault Memory ..................................................................... 68
4.3.5 Operating and display elements - Internal control unit ............................... 73
4.4 Settings before commissioning .......................................................................... 74
4.4.1 Touch-Panel .......................................................................................... 74