Installation
36/ 100
Oleolift-C
■
Install direct suction from the separator up to the transfer point (disposal vehicle) with a
continuously rising gradient, implement alterations in direction in the pipe with 90° elbow
bends with the largest possible radius. If the horizontal pipes are particularly long, then
it may make sense to install the pipe on-site on a gradient towards the disposal point (to
prevent the wastewater flowing back into the grease separator after disposal).
■
Limit the maximum length to the performance of the suction vehicle pump.
The following products for creating direct suction can be purchased from ACO as optional
components:
■
Direct extraction
Scope of supply:
1 = Blank cover
2 = Disposal connection DN 65
3 = Compression fitting OD 90/OD 75
4 = Compression fitting OD 90/OD 90
5 = Submersible bend with connecting pipe
6 = Compression fitting OD 90/OD 90
7 = Submersible pipe
8 = Pipe clamp
1
2
3
4
5
6
7
8
■
A connection box with space for
2 connecting couplings (for direct
suction pipe and pendulum gas pipe
and one water connection)
■
Street installation cap