ACO FAM-P, User Instruction, Page: 37 / 41

- 37 -
Description of
operation Application
example
Settings Remar
ks
Activation of the OUTPUT
for a pre-set time after
closing the INPUT
contacts Gate control with third
wire from the receiver
(only INS- UP720M, INS-
UP720MR) IN=0
OUT=t (t: time from 1 to 255
s) NrF=0 For P2 Port, the function
works only during a call
Activation of the OUTPUT
for a pre-set time
simultaneously with
triggering the E-lock Automatic staircase light
switch on when door is
opened IN=0
OUT=t (t: time from 1 to
255 seconds)
NrF=1 For P1 port, the function
works only for physical
addresses set in P24
Control of a second E-lock
with one control panel and
two doors
Activation of apartment
call procedure after
closing the INPUT
contacts Direct uniphone call
(external direct call
button) IN=y (y: receiver physical
address from 1 to 255)
OUT=x (x: has no effect)
NrF=1 or 2 or 3 Works for function No. 1 or
2 or 3
Activation of the E-lock after
closing the INPUT contacts Activation of the E-lock
from an external push
button IN=0
OUT=x (x: has no effect)
NrF=1 or 2 or 3 It works for function No. 1
or 2 or 3.
E-lock triggering time as
for standard opening
Activation of the OUTPUT
for a pre-set time after
pressing the F2 key on the
uniphone or after selecting
the code preceded by the
double pressing the key
button Gate control using standard
two wires from the camera
and code from the keypad IN=x (x: has no effect) OUT=t
(t: time from 1 to 255 s)
NrF=2 Control from
uniphone works only
during a call
Activating the E-
lock without making
a call Pick up the handset and
press the "key" button three
times
For INS-UP720MR and
INS- MPR, press the
“key” button once without
lifting the handset N=x (x: has no effect)
OUT=0
NrF=3 Works only for P1 port, no
need to connect the
CDN-I/O module
Activation of the OUTPUT
for a pre-set time without
making a call Pick up the handset and
press the "key" button three
times
For INS-UP720MR and
INS- MPR, press the
“key” button once IN=x (x: has no effect) OUT=t
(t: time from 1 to 255 s)
NrF=3 Works only for P1 port
Activation of the OUTPUT
for a pre-set time after
pressing any key on the
unit/panel or expansion
module Automatic light switch on in
front of the entrance / on
the staircase IN=x (x: has no effect) OUT=t
(t: time from 1 to 255 s)
NrF=3 Works only for P2 port
Example settings can be found in the table on the next page