ACO FAM-P, User Instruction, Page: 31 / 41

- 31 -
IX. DOORMAN FUNCTION
In doorman function (doorman's call), upon closing contacts of the additional INPUT of the panel,
each call to any number will always be forwarded to doorman’s receiver, whose number is set as the
auxiliary input value. Auxiliary input contacts can activated by a clock etc. Doorman’s receiver
number address must be outside the range of receivers, supported by the panel located in the
gatehouse. The call forward function should be activated in the panel settings.
X. PANEL PROGRAMMING
It is possible to change a number of operating parameters of the panel (such as individual
access codes, opening time, ringtone, etc.) Service programs are also available to facilitate
installation and repairs.
Basic parameters can be changed using the service menu, accessible from the panel's numeric
keypad, access to which is protected by the
installer’s password.
All settings can be accessed and archived using a PC and the free "FAM_P” software (can
be downloaded from www.support.aco.com.pl ). An optional programming cable (CDN- USB) is
required to connect the panel to a PC; the cable must be purchased separately.
NOTE! Connect the EXTMOD cable to the panel as shown on the left.
Panel Master
(at the main entrance, CDNP,
INSPIRO, Familio P and PV)
Doorman’s office
Doorman’s panel
Doorman’s receiver Residents’ receivers
Slave panel
Familio P