CDN-USB
USB
CDNP7ACC / I
INSTRUCTIONS FOR CHANGING LANGUAGES
To enter the installer's menu:
- press the " " button
- within 5 seconds enter
"
1507
xxxx", where "xxxx" is the four-
digit password of the Installer, which
is factory set to"
0000
" and must be
changed to its own!
NOTE!
In the latest control panels
(soft. ver.:
K-15
), "
0000
" has been
replaced by the
last four
digits of the
product
serial number
available on the
sticker.
Confirmation of entry
there is a beep in the installer's menu,
the software version appears on the
display and then program number „
0"
:
"
Otwie
" (Default - Polish) or other
language e.g. „
Open
”.
soft. ver.:
K-14
Press ”79'’ simultaneously to exit the
menu and start the
countdown
.
After the countdown has been
completed and during the momentary
the "
ACO
" sign displayed
- press simultaneously the buttons
"
456
" to set language no. 2
- press simultaneously the buttons
"
123
" to set language no. 1
soft. ver.:
K-15
To
change the language just press in
installer’s menu simultaneously the
buttons:
- "
456
" to set language no. 2
- "
123
" to set language no. 1
B - using software
https://www.support.aco.com.pl/
1
2
A - from panel (only 2 languages)
Use latest version of
x700
software.
Select one of the languages and
save settings
: „
Main unit`s parameters
”
Basic set of languages:
Ask your seller for other set of languages.
1 PL
2 EN
3 DE
4 FR
1
2
3
4
Language
Main unit’s parameters
Save settings
Please download the latest version of x700 software from:
