ACME FLANDINA 22 IP Page 42 User Manual Download

Page: 42 / 44

41A

8. Troubleshooting

Following are a few common problems that may occur during operation. Here are some

suggestions for troubleshooting:

A. The unit does not work and no light

1. Check the connected power.

2. Measure the voltage.

3. Check the power indicator to see whether it can be lit up or not.

B. Not responding to the DMX controller

1. Check whether the DMX connectors and the DMX cables are connected correctly.

2. Check whether the DMX address is correctly set.

3. If the intermittent DMX signal problem occurs, check whether the XLR socket and the signal

cable are well connected.

4. Try it with another DMX controller.

5. Check whether the DMX cables run near or alongside to the high-voltage cables, which may

damage or interfere with the signal circuit.

9. Fixture Cleaning

It is absolutely essential that the fixture is kept clean to ensure the maximum light-output and allow

the fixture to function reliably throughout its life. The fixture must be cleaned regularly to avoid dust,

dirt and smoke-fluid residues building up on or within the fixture. The cleaning frequency depends on

the application environment. Clean the fixture immediately if the dust enters it to avoid damage to

the optical lens due to excessive dust.



A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no

circumstances should solvents be used.



Always dry the parts carefully.



Clean the external optical lens at least every 20 days.

Summary of Contents for FLANDINA 22 IP













































Search results

Summary of Contents for FLANDINA 22 IP

Reviews:

Related manuals for FLANDINA 22 IP

Brands by name

Popular brands

ACME FLANDINA 22 IP, User Manual

Search results

Summary of Contents for FLANDINA 22 IP

Reviews:

Related manuals for FLANDINA 22 IP

Brands by name

Popular brands