P/T Feedback
To select
P/T Feedback
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
No
(Pan or tilt’s position will not feedback while out of step) or
Yes
(Feedback while pan/tilt out of step),
press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle
30 seconds to exit menu mode.
Dimmer Curve
To select
Dimmer Curve
, press the
ENTER
button to confirm. Use the
DOWN
/
UP
button to select
Linear, Square Law, Inv SQ Law
or
S Curve
, press the
ENTER
button to store. Press the
MENU
button
back to the last menu or let the unit idle 30 seconds to exit menu mode.
Optically Linear:
The increase in light intensity appears to be linear as DMX value is increased.
Square Law:
Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law:
Light intensity control is coarser at low levels and finger at high levels.
S-Curve:
Light intensity control is finger at low levels and high levels and coarser at medium levels.
Dimmer Speed
To select
Dimmer Speed
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
Fast
or
Smooth
, press the
ENTER
button to store. Press the
MENU
button back to the last menu or
let the unit idle 30 seconds to exit menu mode.
White Balance
To select
White Balance
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
Red, Green, Blue, Red1, Green1, Blue1……
or
Red5, Green5, Blue5,
press the
ENTER
button to store.
Use the
UP
/
DOWN
button to adjust the value from
125
to
255
, press the
ENTER
button to store.
Press the
MENU
button back to the last menu or let the unit idle 30 seconds to exit menu mode.
Invert Pixel Order
To select
Invert Pixel Order,
press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
Disable
or
Enable
, press the
ENTER
button to store. Press the
MENU
button back to the last menu
or let the unit idle 30 seconds to exit menu mode.
11C