5B
3. Control Panel
1. DMX OUT:
For DMX512 link, use 5-pin XLR cable to link the next units
2. DMX IN:
For DMX512 link, use 5-pin XLR cable to link the unit and controller
3. POWER IN:
Connects to supply power
4. Installation
Always ensure that the unit is firmly fixed to avoid vibration and slipping off during operation.
Ensure that the trussing or area of installation must be able to hold 10 times the weight without any
deformation. Always install a safety cable that can hold at least 12 times the weight of the fixture
when installing.
DO install and operate by qualified operator. It must be installed in a place where there is out of the
reach of people.
1. Drill a rectangular hole with a length of 255mm and a width of 167mm in the ceiling. The ceiling
thickness range is 6mm≤L≤29mm.
Summary of Contents for BIG BANG
Page 1: ......