ACM ACM-TPG08, User Manual

Page: 19 / 84

18
SENSOR IN RS 485 SENSOR OUT
VIDEO IN VIDEO OUT
S-VIDEO
NT PALAUDIO OUT
AUDIO IN
SERIAL
DC 12 V LOOP OUT
LAN
. .
Extended Serial Cable
4) Connection Using PTZ camera
In case of using pan and tilt cameras, connect PAN/TILT DRIVE to product as
shown at following figure.
RS485 CABLE
VIDEO CABLE
SPEED
DOME
5) Connection with POS or ATM
In case of operating with POS or ATM , connect POS or ATM to product using the
expanded serial cable as shown at following figure.
6) Installing Hard disk drive
In case of installing the hard disk drive, open the upper case and install the hard disk
drive on the hard bracket. If you use the one hard disk drive, it should be set the IDE1
with master setting. If you use the 2 hard disk drives, it also should be set the IDE1
with 1 master and 1 slave setting. Remember that the main power should be off to
install the hard disk drive. If you have any trouble, please contact the technical
support.
7) Installing backup drive
You can use the DVD-RW or CD-RW for backup. In this case you can install just
one hard disk drive. To install the backup drive, open the top cover and install the
backup drive on the bracket. It should be connected to IDE 2 with slave setting.
CH 2 Installation Method and Cautions