SGM3000 Series Smart Meters
User Manual
64
GEH-7111-1.00-2
Restricted
Figure 14 SGM3031 Terminal Connections
6.2.1.3 SGM3033Terminals
The SGM3033 meters require six line and two neutral terminals, and two load control
terminals.
The SGM3023 single phase meters are available in eight primary terminals and two load control
arrangements.
The load control terminals will be located on the right hand side of the terminal block.
The SGM3033 will be available in the following configuration:
•
Line(A-in)-line(A-out)-line(B-in)-line(B-out)-line(C-in)-line(C-out)-neutral-neutral
configuration
Figure 15 SGM3033 Terminal Connections
6.2.1.4 SGM30C2 Terminals
The SGM30C2 meters require six current, three voltage, and one neutral terminal. The neutral
terminal is required for the voltage feeds and will be in alignment with the voltage terminals.
The meter also requires two terminals for the external relays.
The SGM30C2 meters are available in six current terminal, four voltage terminal, and four load
control arrangements.
The current terminal arrangements are the same as the SGM3030 meter. The three voltage
terminals are located between the two respective current terminals. The neutral terminal is
located in the same alignment as the three voltage terminals and between the two neutral
