Description
17
4
Description
4.1
Intended Purpose
The manual workplace solution
Workstation
CLASSIC
Fibre
is characterized by its large
workroom. You can mount workpieces with an area of up to 340 mm x 360 mm on its
T-slot plate.
Depending on the laser system and objective used, a marking field of maximum
180 mm x 180 mm is available.
The integrated electrically driven Z axis allows marking on workpieces with differing
heights. The stroke length of the Z axis is 150 mm.
A focus finder (consisting of two pilot lasers) assist the operator in setting up the proper
working distance within a few seconds.
The electrically driven safety door enables workpieces to be changed easily.
Summary of Contents for CLASSIC Fibre
