ACG 39 Roadster eGC 2012 Owner'S Manual Download Page 58 | Manualshive

Page: 58 / 60

background image

Transport or Towing

Transporting Your Vehicle

The best way to transport your vehicle is in an enclosed trailer.
If it is necessary to transport your vehicle on an open trailer, follow these guidelines:
1. Never transport your vehicle while the vehicle is facing rearward on the trailer.
2. With the vehicle facing forward, pull the trailer at speeds of 55 MPH or less.
3. Secure any items that could be affected by airflow through the vehicle.
4.

Do not secure across any plastic body or floor panel component of the

vehicle.

Use Tie-Down points on the frame identified with an “

X

” as shown on

NOTE:

ACG is not responsible for damage incurred or lost items due to
vehicle towing.

CAUTION!

TOWING THE VEHICLE IS NOT RECOMMENDED.
This vehicle is not designed for dolly towing.
Any vehicle failures resulting from dolly towing will not be covered
under vehicle warranty.

Copyright © 2009-2011 American Custom Golf Cars, Inc.

Page

58

«
...
56
57
58
59
60
»

Summary of Contents for 39 Roadster eGC 2012





























































Reviews:

No comments

Related manuals for 39 Roadster eGC 2012

RXV GOLF CAR 2008

Brand: E-Z-GO Pages: 122

2012 T SPORT NEV

Brand: ACG Pages: 61

Brand: Hummer Pages: 61

HAULER PRO 2022

Brand: Cushman Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands